Just to mirror what Ed mentioned…
I have my complete 160 - 5G station running off of my K3 bought in 2011 and upgraded.
I have the internal 144 transverter which had to go back 3 times to get spurs sorted out.
One think I note, is signal compression as I have pagers just below 144 Mhz and when they fire up
They desense the 2 m transverter….
I’ve correlated this with an SDR. The problem is lack of filtering in the internal transverter as the front end sees well beyond 144 - 148.
The solution was to add a filter with a steep rolloff below 144 Mhz…
I would hope that the guys at Elecraft when designing the new K4 transverter system will take a cue from DEMI and Q5 and ensure adequate
Bandpass filtering in the front ends… I would think TOKO or similar are your friends on this …
Just my 2 cents. I use the 2 m to drive all my microwave stuff as well and with GPS locking its nice to be able to know where you are …
Having said that, Q5 have a really slick multi band transverter that would integrate really well on the K3 or K4… but at a price point.
Anyway I do hope Elecraft come up with something that is crunch proof and rock solid for 144 222 432 MHz.
73 Dana VE3DS
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
