Hello,
I can TX with my Yamaha CM500 in the back of my K3 with MENU MIC SEL = rP.L bIAS now I connected DXDoubler, add the little battery bias to the CM500 as Rob told me, and turn OFF bIAB, so now I have MENU MIC SEL = rP.L But I cannot get ON AIR with the K3. My second radio for SO2R is a TS850 and is TX properly. I appreciate any help, this must me my sleeping hours pre contest hi hi. 73, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Are you sure the DXDoubler is properly passing the mic audio? The DX Doubler schematic shows a DC connection from the mic jack to each of the "radio" jacks via a DPDT relay that switches both the mic hot and mic ground. I would suspect you have either a bad relay or have not wired the cable between DXDoubler and your K3 correctly. 73, ... Joe, W4TV On 10/28/2011 3:31 PM, Jorge Diez - CX6VM wrote: > Hello, > > > > I can TX with my Yamaha CM500 in the back of my K3 with MENU MIC SEL = rP.L > bIAS > > > > now I connected DXDoubler, add the little battery bias to the CM500 as Rob > told me, and turn OFF bIAB, so now I have MENU MIC SEL = rP.L > > > > But I cannot get ON AIR with the K3. > > > > My second radio for SO2R is a TS850 and is TX properly. > > > > I appreciate any help, this must me my sleeping hours pre contest hi hi. > > > > 73, > > Jorge > > CX6VM/CW5W > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
thanks Rob, Joe, Dave, Ted for the help.
finally was a problem in the DXD K3 cable, in the mono audio connector. No connectivity between the outside point of the connector and inside tab. I replaced the audio mono connector of the DXD cable and now it´s running. Thanks very much, so now 2 hours to sleep, hi hi.... 73, Jorge CX6VM -----Mensaje original----- De: Joe Subich, W4TV [mailto:[hidden email]] Enviado el: Viernes, 28 de Octubre de 2011 07:12 p.m. Para: Jorge Diez - CX6VM; Elecraft Reflector Asunto: Re: [Elecraft] K3 and DXDoubler URGENT please! Are you sure the DXDoubler is properly passing the mic audio? The DX Doubler schematic shows a DC connection from the mic jack to each of the "radio" jacks via a DPDT relay that switches both the mic hot and mic ground. I would suspect you have either a bad relay or have not wired the cable between DXDoubler and your K3 correctly. 73, ... Joe, W4TV On 10/28/2011 3:31 PM, Jorge Diez - CX6VM wrote: > Hello, > > > > I can TX with my Yamaha CM500 in the back of my K3 with MENU MIC SEL = rP.L > bIAS > > > > now I connected DXDoubler, add the little battery bias to the CM500 as Rob > told me, and turn OFF bIAB, so now I have MENU MIC SEL = rP.L > > > > But I cannot get ON AIR with the K3. > > > > My second radio for SO2R is a TS850 and is TX properly. > > > > I appreciate any help, this must me my sleeping hours pre contest hi hi. > > > > 73, > > Jorge > > CX6VM/CW5W > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |