Also, on Windows, you can run the DXLabs suite, and add the
fldigi-dxlabs gateway (
http://www.n2amg.com/software/fldigi-dxlabs-gateway/ ) and fldigi can
talk to the commander part o fhte suite for rig control. It'll also
integrate nicely with the logging & spotting portions of the suite as well.
73, Ross N4RP
On 5/6/2015 11:04 AM, Don Wilhelm wrote:
> Ramon,
>
> You need to use Hamlib or Rigcat with Fldigi - I think Hamlib is
> easier, but YMMV. Configure Fldigi to use whichever you have chosen.
> Connect the K3 to a COM port on your computer and tell Hamlib (or
> Rigcat) which port that may be, and it should work.
>
> I 'hear tell' that FLRIG can give the same capability, but I have not
> tried it.
>
> 73,
> Don W3FPR
>
>
> On 5/6/2015 8:59 AM, Ramon Tristani wrote:
>> I have successfully used the K3 with FLDigi and a Signalink USB for
>> quite some time now. However, I have never tried to control or even
>> display the frequency on my FLDigi screen (Mac or PC). What
>> connection should I have to the K3 in order to achieve this? How
>> should I configure FLDigi for that purpose? Any help will be most
>> welcomed! Thanks!
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
