K3 and Icom 7700

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 and Icom 7700

akm-2
Hi all

just  read  Eham review  of Ic7700 in  comparison with K3.

I am  just  wondering  what  the  group  thinks.

And  some must  own  both  rigs ??

moe
MM0MRM
K2 # 5158
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

RE: K3 and Icom 7700

Jim-168
I read them. Over the past several years agreed with some, disagreed with
some when owning the rig reviewed. Never pay much attention when the call
isn't given, some write great reviews when selling a rig, some won't write a
bad review especially when paying out a sizeable amount of money for a new
rig. Several years ago (over 20) a newsletter publisher highly regarded by
many really talked up a new Kenwood rig. I bought one and I quickly noticed
it was one of the noisiest rigs I ever owned, drifted, and was very non
selective. I could hear stations several KC's up or down the band. I quickly
dumped it. Not to say all Kenwoods are bad rigs.

Always be very cautious if it's touted as the best thing since sliced bread
but still have an open mind.  

By the way, I own Icoms and also have the K-3. I like my K-3. Just a couple
of items I would like to see I understand are being worked on for future
firmware updates. I think we are close.

Oh! And I have been looking at the 7700 also.

73 de KE4WY Jim

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of akm
Sent: Monday, April 07, 2008 11:17 AM
To: [hidden email]
Subject: [Elecraft] K3 and Icom 7700

Hi all

just  read  Eham review  of Ic7700 in  comparison with K3.

I am  just  wondering  what  the  group  thinks.

And  some must  own  both  rigs ??

moe
MM0MRM
K2 # 5158
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K3 and Icom 7700

Bill VanAlstyne W5WVO
Jim wrote:

> I read them. Over the past several years agreed with some, disagreed
> with some when owning the rig reviewed. Never pay much attention when
> the call isn't given, some write great reviews when selling a rig,
> some won't write a bad review especially when paying out a sizeable
> amount of money for a new rig...

Yup. The thing with the eham reviews is that you have to assess what the
reviewing ham is trying to do with the rig. If he is a casual ragchewer, he is
not going to be testing and evaluating the rig the same way a high-end
contester will. Think of it as the difference between driving to the grocery
store and church at 30 MPH, versus driving a Formula One Gand Prix course at
180 MPH. A car designed for either kind of driving will feel unsatisfactory to
the driver who has the "wrong" car for his application.

I try to find reviews from guys who seem to be doing the same kinds of things
I'm doing. If the type of operation done isn't even mentioned in the review,
it's basically useless. "Super rig, have had it for three weeks and can't find
anything to complain about. 5.0!" is simply noise, somebody expressing their
emotional state. No law against it, nice that he's happy, but not otherwise
meaningful.

Bill W5WVO


Several years ago (over 20) a

> newsletter publisher highly regarded by many really talked up a new
> Kenwood rig. I bought one and I quickly noticed it was one of the
> noisiest rigs I ever owned, drifted, and was very non selective. I
> could hear stations several KC's up or down the band. I quickly
> dumped it. Not to say all Kenwoods are bad rigs.
>
> Always be very cautious if it's touted as the best thing since sliced
> bread but still have an open mind.
>
> By the way, I own Icoms and also have the K-3. I like my K-3. Just a
> couple of items I would like to see I understand are being worked on
> for future firmware updates. I think we are close.
>
> Oh! And I have been looking at the 7700 also.
>
> 73 de KE4WY Jim
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of akm
> Sent: Monday, April 07, 2008 11:17 AM
> To: [hidden email]
> Subject: [Elecraft] K3 and Icom 7700
>
> Hi all
>
> just  read  Eham review  of Ic7700 in  comparison with K3.
>
> I am  just  wondering  what  the  group  thinks.
>
> And  some must  own  both  rigs ??
>
> moe
> MM0MRM
> K2 # 5158
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K3 and Icom 7700

k4tmc
In reply to this post by akm-2

Moe,

I am glad that Mr. RFEXPERT has found a rig he is happy with...

I am happy with my choice.

73,
Henry - K4TMC
K3 #98
**************
Planning your summer road trip? Check out AOL Travel
Guides.
     
(http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com