Elecraft › [K3]

K3 and K3_EZ

Classic

List

Threaded

2 messages Options

reliant325

K3 and K3_EZ

Having a slight problem with this.
I can start the program, connect to the K3 OK and control things as expected.
Problem is....when I click on “Disconnect” it doesn’t respond and the program freezes.
I then have to use CTRL/ALT/DELETE to bring up Task Manager to close the program.

Running Win7 Pro 64 bit

Any Tips please?

Roger G0IUW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

vk4tux

K3 and K3_EZ

Also try install of;

http://www.ftdichip.com/Drivers/CDM/CDM%202.08.24%20WHQL%20Certified.zip

amd64 folder will contain your 64 bit driver if you update the ftdi driver to locate this folder only.

-----Original Message-----
From: Adrian [mailto:[hidden email]]
Sent: Thursday, 9 August 2012 7:41 PM
To: '[hidden email]'
Subject: RE: [Elecraft] K3 and K3_EZ

1. Check whether you have turned on the windows feature of .NET Framework 3.5.1.
Please go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Check the box next to Microsoft .NET Framework 3.5.1.

2. Use <http://blogs.msdn.com/astebner/pages/8999004.aspx> Verification Tool to verify .Net Framework 2.0 SP2, 3.0SP2, 3.5 SP1. If .Net Framework cannot be verified on your computer, you can try to follow the steps mentioned in the following blog to repair them though this article is about vista.
See:
<http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx>

http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of [hidden email]
Sent: Thursday, 9 August 2012 6:19 PM
To: [hidden email]
Subject: [Elecraft] K3 and K3_EZ

Having a slight problem with this.
I can start the program, connect to the K3 OK and control things as expected.
Problem is....when I click on “Disconnect” it doesn’t respond and the program freezes.
I then have to use CTRL/ALT/DELETE to bring up Task Manager to close the program.

Running Win7 Pro 64 bit

Any Tips please?

Roger G0IUW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html