N6TR:
>This is an important point that I should have made before. We need an option to ignore any input on the paddle input (or CW input) unless PTT is asserted. Amen! Rather than using a Spot button, I send a few dashes from my key to hear my sidetone when zero beating someone. Less effort to move my hand from the paddle to the radio doing it this way. After I'm zero- beat, I use PTT via foot switch to transmit. 73, Bill W4ZVI'm with you, Bill (and Tree). That's exactly what I do.73, Norm - W1MO _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Well, the response to this was rather positive for having the ability to turn off QSK. I, like Tree, should have included the point about having PTT input for CW. Since I rarely use an amp or full breakin, I previously didn't have a need for a footswitch in CW. But I now will consider it's use after reading this thread. Thanks!
At 9/21/2007 04:31 PM, Norm Duxbury wrote: >N6TR: > >This is an important point that I should have made before. We need an option >to ignore any input on the paddle input (or CW input) unless PTT is asserted. > > Amen! Rather than using a Spot button, I send >a few dashes from my key to hear my sidetone when zero >beating someone. Less effort to move my hand from the >paddle to the radio doing it this way. After I'm zero- >beat, I use PTT via foot switch to transmit. > > 73, Bill W4ZVI'm with you, Bill (and Tree). That's exactly what I do.73, Norm - W1MO >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by Norm Duxbury
FWIW, a good friend of mine and super CW OP/Contester/DXER (past-pres of
NCCC) was a strong advocate of the CW PTT, esp if running the linear. WA6VNN Al ************************************** See what's new at http://www.aol.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by Norm Duxbury
For super fast contesting I don't see how one
could beat the combination of a QSK amplifier and a QSK rig. I must be missing something. de Joe aa4nn -----Original Message----- >From: [hidden email] >Sent: Sep 21, 2007 7:12 PM >To: [hidden email] >Subject: Re: [Elecraft] K3 and QSK > >FWIW, a good friend of mine and super CW OP/Contester/DXER (past-pres of >NCCC) was a strong advocate of the CW PTT, esp if running the linear. > >WA6VNN Al > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
That's true. But if you don't have a QSK amp,
using PTT to switch the radio from RX to TX, send the memory (CQ, Exchange or QRZ) and immediately back to RX is the next best thing. No VOX delay hang time. 73 Hank K8DD Joe, aa4nn wrote: > For super fast contesting I don't see how one > could beat the combination of a QSK amplifier > and a QSK rig. I must be missing something. > de Joe aa4nn > > -----Original Message----- > >> From: [hidden email] >> Sent: Sep 21, 2007 7:12 PM >> To: [hidden email] >> Subject: Re: [Elecraft] K3 and QSK >> >> FWIW, a good friend of mine and super CW OP/Contester/DXER (past-pres of >> NCCC) was a strong advocate of the CW PTT, esp if running the linear. >> >> WA6VNN Al _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Free forum by Nabble | Edit this page |