K3 and Steppir antenna

[W3ACO]

I have a K3 and would like to control the Steppir band and frequency segment selection via the Steppir data port.
I am confused as to what is needed. I do not have a computer attached to the K3 nor the Steppir.  Any advice as to what to do?

Thanks

Rich W3ACO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Reublin]

  Rich,

If you connect a cable from the K3 to the SteppIR controller, it will follow the
radio. The simple way is to order the cable from SteppIR. It will have a computer
connector on it, but it doesn't have to be attached to your computer. There is also a
schematic on the SteppIP site if you want to build one your self.

73, Mike NF4L

On 9/23/2010 7:51 PM, Richard Haendel wrote:

> I have a K3 and would like to control the Steppir band and frequency segment selection via the Steppir data port.
> I am confused as to what is needed. I do not have a computer attached to the K3 nor the Steppir.  Any advice as to what to do?
>
> Thanks
>
> Rich W3ACO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html