Good morning, I have an Elecraft K3 running it in DATA A mode line out
on rig (controlled through MIC gain) is set to 2 any more and ACL rises
to high the output is 2 watts. I have been on 20 and 40 meter WSPR
without any troubles. Within the past 2 weeks have been working on 30
meters WSPR and not having any luck. One thing I did notice today was
when set up on 30 meters and line out at still set at 2 also power at 2
watts but watt meter (LP-100A) is showing no output. Now if I increase
the line (turn up MIC gain in the K3 case) at level 5 or 6 I am getting
about 1/2 watt and that's it. I don't feel I should have to re-adjust
sound card settings for 30 meters when all is well with 20 and 40 ??
Any thoughts??
Mike
VE3WDM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
