It happened several times that the connector between DSP board and
Frontplate was not set properly into the corresponding Jack. (It´s easy to
place it just a millimeter parallel to the jack. If so, the front Mike does
not work.
73 de Peter, DL2FI
> -----Original Message-----
> From:
[hidden email] [mailto:elecraft-
>
[hidden email]] On Behalf Of Ron Gould
> Sent: Thursday, March 25, 2010 12:47 PM
> To:
[hidden email]
> Subject: [Elecraft] K3 and no front microphone working
>
> I have a K3 and MH2 as well as a Quiet Phone Plus. The Quiet Phone
> Plus only works from the rear but not the front. I have Heil Kenwood
> adaptor. The MH2 does not work either. Both cases not TX audio from
> front connector. No Sub receiver installed. Serial number in the
> 2700's. I have selected FP.L for both and Bias for M2. Neither works.
> Advice appreciated. I did submit inquiry to Elecraft but they are now
> closed. Did I miss something?
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
