Gavin -
I'm not familiar with MRP 40, but I question that it decodes CW via an RS232 cable.
Maybe an audio cable?
SteppIR sells a "Y" cable that plugs into the PC and has 2 branches, one of which
goes to the K3, and the other goes to the SteppIR controller. I have, and use it.
They also have the schematic on-line if you'd like to build one.
I'm able to send CW from my logging program. Chek the usage documentation on MRP 40.
73, Mike NF4L
On 5/26/2011 1:00 PM, Gavin Keegan wrote:
> Can anyone help or advise please ? I would like to install the MRP 40
> program on my shack computer and send and receive CW via an RS232 lead
> connected to my K3, but I already use an RS232 lead connected between
> the K3 and the controller for my SteppIR antenna. Can anyone advise how
> I can connect both the shack computer and the SteppIR controller to the
> K3 RS232 socket and use both items at the same time ? Gavin Keegan G6DGK
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
