I bought a second K3 (used) after being a happy owner with the first one
for about 5 years. The radio worked great for several weeks and I used it as a remote while on a 3 week vacation. Now I'm seeing some problems. Hopefully it is something that I have done wrong! #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) there is no beep. #2. I cannot get the radio to transmit power in SSB using a known good mic into the front panel jack or using the line in on the rear panel. Matching the menu settings to my first K3 does not provide joy. Using the rear panel mic input does work. TIA and 73, -John NI0K ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Reload your firmware, hopefully you saved a copy. IF that doesn't work, let us know!
73, Bill K9YEQ https://wrj-tech.com/ -----Original Message----- From: [hidden email] <[hidden email]> On Behalf Of John Simmons Sent: Friday, March 15, 2019 5:08 PM To: [hidden email] Subject: [Elecraft] K3 audio issues I bought a second K3 (used) after being a happy owner with the first one for about 5 years. The radio worked great for several weeks and I used it as a remote while on a 3 week vacation. Now I'm seeing some problems. Hopefully it is something that I have done wrong! #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) there is no beep. #2. I cannot get the radio to transmit power in SSB using a known good mic into the front panel jack or using the line in on the rear panel. Matching the menu settings to my first K3 does not provide joy. Using the rear panel mic input does work. TIA and 73, -John NI0K ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Did that already. Any other suggestions?
-John NI0K > Bill Johnson <mailto:[hidden email]> > Friday, March 15, 2019 5:10 PM > Reload your firmware, hopefully you saved a copy. IF that doesn't > work, let us know! > > 73, > Bill > K9YEQ > > https://wrj-tech.com/ > > -----Original Message----- > From: [hidden email] > <[hidden email]> On Behalf Of John Simmons > Sent: Friday, March 15, 2019 5:08 PM > To: [hidden email] > Subject: [Elecraft] K3 audio issues > > I bought a second K3 (used) after being a happy owner with the first > one for about 5 years. > > The radio worked great for several weeks and I used it as a remote > while on a 3 week vacation. Now I'm seeing some problems. Hopefully it > is something that I have done wrong! > > #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) > there is no beep. > > #2. I cannot get the radio to transmit power in SSB using a known good > mic into the front panel jack or using the line in on the rear panel. > Matching the menu settings to my first K3 does not provide joy. Using > the rear panel mic input does work. > > TIA and 73, > -John NI0K > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > John Simmons <mailto:[hidden email]> > Friday, March 15, 2019 5:08 PM > I bought a second K3 (used) after being a happy owner with the first > one for about 5 years. > > The radio worked great for several weeks and I used it as a remote > while on a 3 week vacation. Now I'm seeing some problems. Hopefully it > is something that I have done wrong! > > #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) > there is no beep. > > #2. I cannot get the radio to transmit power in SSB using a known good > mic into the front panel jack or using the line in on the rear panel. > Matching the menu settings to my first K3 does not provide joy. Using > the rear panel mic input does work. > > TIA and 73, > -John NI0K > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
There is a menu setting for #1.
For #2 -- VOX or PTT? If VOX, is the VOX icon showing? VOX Gain and Mic Gain may need adjustment. Is Lin In selected when you're trying to use a mic? Check the settings for where the mic is plugged in (front or rear panel), and whether bias is turned on (if the mic is an electret). 73, Jim K9YC On 3/15/2019 7:15 PM, John Simmons wrote: > Did that already. Any other suggestions? > > -John NI0K > >> Bill Johnson <mailto:[hidden email]> >> Friday, March 15, 2019 5:10 PM >> Reload your firmware, hopefully you saved a copy. IF that doesn't >> work, let us know! >> >> 73, >> Bill >> K9YEQ >> >> https://wrj-tech.com/ >> >> -----Original Message----- >> From: [hidden email] >> <[hidden email]> On Behalf Of John Simmons >> Sent: Friday, March 15, 2019 5:08 PM >> To: [hidden email] >> Subject: [Elecraft] K3 audio issues >> >> I bought a second K3 (used) after being a happy owner with the first >> one for about 5 years. >> >> The radio worked great for several weeks and I used it as a remote >> while on a 3 week vacation. Now I'm seeing some problems. Hopefully >> it is something that I have done wrong! >> >> #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) >> there is no beep. >> >> #2. I cannot get the radio to transmit power in SSB using a known >> good mic into the front panel jack or using the line in on the rear >> panel. >> Matching the menu settings to my first K3 does not provide joy. Using >> the rear panel mic input does work. >> >> TIA and 73, >> -John NI0K >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> John Simmons <mailto:[hidden email]> >> Friday, March 15, 2019 5:08 PM >> I bought a second K3 (used) after being a happy owner with the first >> one for about 5 years. >> >> The radio worked great for several weeks and I used it as a remote >> while on a 3 week vacation. Now I'm seeing some problems. Hopefully >> it is something that I have done wrong! >> >> #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) >> there is no beep. >> >> #2. I cannot get the radio to transmit power in SSB using a known >> good mic into the front panel jack or using the line in on the rear >> panel. Matching the menu settings to my first K3 does not provide >> joy. Using the rear panel mic input does work. >> >> TIA and 73, >> -John NI0K >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by John Simmons
John;
Possibly this: If it is a older K3, the contacts between the PC Board and the front panel can lose connectivity. I have been successful cleaning with deoxit. The materials are dis-similar, There is a gold pin replacement to solve the problem. 73's Richard K6VV On 3/15/2019 7:15 PM, John Simmons wrote: > Did that already. Any other suggestions? > > -John NI0K > >> Bill Johnson <mailto:[hidden email]> >> Friday, March 15, 2019 5:10 PM >> Reload your firmware, hopefully you saved a copy. IF that doesn't >> work, let us know! >> >> 73, >> Bill >> K9YEQ >> >> https://wrj-tech.com/ >> >> -----Original Message----- >> From: [hidden email] >> <[hidden email]> On Behalf Of John Simmons >> Sent: Friday, March 15, 2019 5:08 PM >> To: [hidden email] >> Subject: [Elecraft] K3 audio issues >> >> I bought a second K3 (used) after being a happy owner with the first >> one for about 5 years. >> >> The radio worked great for several weeks and I used it as a remote >> while on a 3 week vacation. Now I'm seeing some problems. Hopefully >> it is something that I have done wrong! >> >> #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) >> there is no beep. >> >> #2. I cannot get the radio to transmit power in SSB using a known >> good mic into the front panel jack or using the line in on the rear >> panel. >> Matching the menu settings to my first K3 does not provide joy. Using >> the rear panel mic input does work. >> >> TIA and 73, >> -John NI0K >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> John Simmons <mailto:[hidden email]> >> Friday, March 15, 2019 5:08 PM >> I bought a second K3 (used) after being a happy owner with the first >> one for about 5 years. >> >> The radio worked great for several weeks and I used it as a remote >> while on a 3 week vacation. Now I'm seeing some problems. Hopefully >> it is something that I have done wrong! >> >> #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) >> there is no beep. >> >> #2. I cannot get the radio to transmit power in SSB using a known >> good mic into the front panel jack or using the line in on the rear >> panel. Matching the menu settings to my first K3 does not provide >> joy. Using the rear panel mic input does work. >> >> TIA and 73, >> -John NI0K >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
I thought about this... but it is s/n 59XX, newer than my first K3.
Still I was wondering if it was a connector issue. BUT! Is there a reason that I have both symptoms at the same time? -J > DC <mailto:[hidden email]> > Friday, March 15, 2019 9:42 PM > John; > > Possibly this: > > If it is a older K3, the contacts between the PC Board and the front > panel can lose connectivity. I have been successful cleaning with > deoxit. The materials are dis-similar, There is a gold pin > replacement to solve the problem. > > 73's > > Richard > > K6VV > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > John Simmons <mailto:[hidden email]> > Friday, March 15, 2019 9:15 PM > Did that already. Any other suggestions? > > -John NI0K > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Bill Johnson <mailto:[hidden email]> > Friday, March 15, 2019 5:10 PM > Reload your firmware, hopefully you saved a copy. IF that doesn't > work, let us know! > > 73, > Bill > K9YEQ > > https://wrj-tech.com/ > > -----Original Message----- > From: [hidden email] > <[hidden email]> On Behalf Of John Simmons > Sent: Friday, March 15, 2019 5:08 PM > To: [hidden email] > Subject: [Elecraft] K3 audio issues > > I bought a second K3 (used) after being a happy owner with the first > one for about 5 years. > > The radio worked great for several weeks and I used it as a remote > while on a 3 week vacation. Now I'm seeing some problems. Hopefully it > is something that I have done wrong! > > #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) > there is no beep. > > #2. I cannot get the radio to transmit power in SSB using a known good > mic into the front panel jack or using the line in on the rear panel. > Matching the menu settings to my first K3 does not provide joy. Using > the rear panel mic input does work. > > TIA and 73, > -John NI0K > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > John Simmons <mailto:[hidden email]> > Friday, March 15, 2019 5:08 PM > I bought a second K3 (used) after being a happy owner with the first > one for about 5 years. > > The radio worked great for several weeks and I used it as a remote > while on a 3 week vacation. Now I'm seeing some problems. Hopefully it > is something that I have done wrong! > > #1. When I press any button on the front panel (e.g. A/B, MODE, etc.) > there is no beep. > > #2. I cannot get the radio to transmit power in SSB using a known good > mic into the front panel jack or using the line in on the rear panel. > Matching the menu settings to my first K3 does not provide joy. Using > the rear panel mic input does work. > > TIA and 73, > -John NI0K > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |