K3: band switch question

[K1LI]

Wayne,

You wrote, "What I do is set up the per-band quick memories for different
modes
and starting points on each band. In the case of 80 m, tapping M>V /
M1 gets me to CW mode at 3540, M2 is LSB at 3900, M3 is AM-SYNC at
3870, and M4 is PSK31 at 3580."

Does one have to already be somewhere in the 80m band for this approach to
work?

--
73 -- Brian -- K1LI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Brian,

Yes - the M1-M4 memories are 'per band', so they only apply to the band
you are currently on.

73,
Don W3FPR

Brian Machesney wrote:

> Wayne,
>
> You wrote, "What I do is set up the per-band quick memories for different
> modes
> and starting points on each band. In the case of 80 m, tapping M>V /
> M1 gets me to CW mode at 3540, M2 is LSB at 3900, M3 is AM-SYNC at
> 3870, and M4 is PSK31 at 3580."
>
> Does one have to already be somewhere in the 80m band for this approach to
> work?
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html