K3 break-out box ...

[Joe Subich, W4TV-4]

I've sketched out an idea for a break-out box to be
used with the K3 ACC jack.  The schematic is here:
http://www.subich.com/K3BOB-2.pdf 

If there is sufficient interest and none of the usual
commercial sources are interested in the design, I
will consider doing a kit (circuit board, connectors
and optional case).  I have not laid out the board
or done any cost checks but I'm expecting the unit
to be about 1.5" x 4.0" x 3.0" with connectors front
and back with a preliminary price target "guestimate"
of $30-$40 without case and $45-$60 with case.  

If there is interest, please e-mail [hidden email]
DO NOT reply on the list or to my "lists" e-mail.

73,

   ... Joe, W4TV
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html