> While I wait for my K3 to arrive, I need to make an RS232 cable from the
> K3 to my computer serial port. Does the K3 require the use of a null
> modem cable? I assume to control the K3 with Ham Radio Deluxe &
> Logger32, data needs to be transmitted back & forth between the rig &
> the software program via a RS232 port on the PC. Does this information
> come from the accessory connector & if so what pin outs would be used?
No null modem. Use male on one end, female on the other. You only need
pins 2, 3 and ground (pin 5).
Your K2 interface cable will work if you want to use it.
Tree N6TR
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
