K3 digi

[John-2]

I've had my K3 upgraded with the new syn boards at Elecraft

and just tried to run digi.  In audio settings, the audio coded device

shows up on input but does not on output.

Any ideas.

My rig has been to Elecraft twice for other problems that have

not been resolved.

Thanks for any ideas.

73.

John.



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

John,

I would suggest downloading and installing the FTDI drivers from the
FTDI website and see if the output device and input device show up after
that.

73,
Don W3FPR

On 1/21/2018 1:53 PM, John wrote:

> I've had my K3 upgraded with the new syn boards at Elecraft
>
> and just tried to run digi.  In audio settings, the audio coded device
>
> shows up on input but does not on output.
>
> Any ideas.
>
> My rig has been to Elecraft twice for other problems that have
>
> not been resolved.
>
> Thanks for any ideas.
>
> 73.
>
> John.
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

> In audio settings, the audio coded device
> shows up on input but does not on output.
The audio CODEC is supported by the native Windows USB Audio Class
driver.  It is independent of the FTDI USB to Serial converter (UART).

If an audio input or output is not visible in the Windows Sound Control
panel, I suggest right clicking on the Recording or Playback window and
checking "Show Disconnected Devices" and "Show Disabled Devices".  Once
you can see the devices, the solution should be obvious.

73,

    ... Joe, W4TV


On 1/21/2018 1:53 PM, John wrote:

> I've had my K3 upgraded with the new syn boards at Elecraft
>
> and just tried to run digi.  In audio settings, the audio coded device
>
> shows up on input but does not on output.
>
> Any ideas.
>
> My rig has been to Elecraft twice for other problems that have
>
> not been resolved.
>
> Thanks for any ideas.
>
> 73.
>
> John.
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]