K3 digital mode audio input via LINE IN

[K1LI]

I can't get the K3 to transmit using audio supplied to the LINE IN jack. I'm
working in DATA A mode. I CAN transmit with audio supplied to both the
front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC
SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any
suggestions as to what I've forgotten to set up?

73 -- Brian -- K1LI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Have you adjusted the Line In level to an appropriate value?

Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Brian Machesney
Sent: Tuesday, March 24, 2009 10:34 AM
To: Elecraft reflector
Subject: [Elecraft] K3 digital mode audio input via LINE IN

I can't get the K3 to transmit using audio supplied to the LINE IN jack. I'm
working in DATA A mode. I CAN transmit with audio supplied to both the
front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC
SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any
suggestions as to what I've forgotten to set up?

73 -- Brian -- K1LI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[K1LI]

Dick,

I understand now. One has to use the main MENU MIC SEL to adjust the LINE  
IN level, then one can switch to MIC+LIN = ON.

Thanks,

73 -- Brian -- K1LI

On Mar 24, 2009 1:40pm, Dick Dievendorff <[hidden email]> wrote:
> Have you adjusted the Line In level to an appropriate value?



> Dick, K6KR





> -----Original Message-----

> From: [hidden email]

> [mailto:[hidden email]] On Behalf Of Brian Machesney

> Sent: Tuesday, March 24, 2009 10:34 AM

> To: Elecraft reflector

> Subject: [Elecraft] K3 digital mode audio input via LINE IN



> I can't get the K3 to transmit using audio supplied to the LINE IN jack.  
> I'm

> working in DATA A mode. I CAN transmit with audio supplied to both the

> front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC

> SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any

> suggestions as to what I've forgotten to set up?



> 73 -- Brian -- K1LI

> ______________________________________________________________

> Elecraft mailing list

> Home: http://mailman.qth.net/mailman/listinfo/elecraft

> Help: http://mailman.qth.net/mmfaq.htm

> Post: mailto:[hidden email]



> This list hosted by: http://www.qsl.net

> Please help support this email list: http://www.qsl.net/donate.html



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Iain MacDonnell - N6ML-2]

Brian,

You want to set "MAIN:MIC SEL" to "Line In" (when in "DATA" mode), then
use the "MIC" knob to set the line-in level. I don't think you need (or
want) "MIC+LIN".

     ~Iain / N6ML


[hidden email] wrote:

> Dick,
>
> I understand now. One has to use the main MENU MIC SEL to adjust the LINE  
> IN level, then one can switch to MIC+LIN = ON.
>
> Thanks,
>
> 73 -- Brian -- K1LI
>
> On Mar 24, 2009 1:40pm, Dick Dievendorff <[hidden email]> wrote:
>> Have you adjusted the Line In level to an appropriate value?
>
>
>
>> Dick, K6KR
>
>
>
>
>
>> -----Original Message-----
>
>> From: [hidden email]
>
>> [mailto:[hidden email]] On Behalf Of Brian Machesney
>
>> Sent: Tuesday, March 24, 2009 10:34 AM
>
>> To: Elecraft reflector
>
>> Subject: [Elecraft] K3 digital mode audio input via LINE IN
>
>
>
>> I can't get the K3 to transmit using audio supplied to the LINE IN jack.  
>> I'm
>
>> working in DATA A mode. I CAN transmit with audio supplied to both the
>
>> front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC
>
>> SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any
>
>> suggestions as to what I've forgotten to set up?
>
>
>
>> 73 -- Brian -- K1LI
>
>> ______________________________________________________________
>
>> Elecraft mailing list
>
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>
>> Help: http://mailman.qth.net/mmfaq.htm
>
>> Post: mailto:[hidden email]
>
>
>
>> This list hosted by: http://www.qsl.net
>
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim Brown-10]

On Tue, 24 Mar 2009 11:16:08 -0700, Iain MacDonnell - N6ML wrote:

>You want to set "MAIN:MIC SEL" to "Line In" (when in "DATA" mode), then
>use the "MIC" knob to set the line-in level. I don't think you need (or
>want) "MIC+LIN".

Right. You also need either PTT or VOX. I use VOX, and it works fine.

73,

Jim K9YC


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html