Alan,
You do not need any interface. The only thing you need is a soundcard.
The K3 contains isolating transformers on the Line In and Kine Out rear
jacks.
Just connect 2 stereo cables between the soundcard and those jacks. You
can operate with VOX instead of PTT. Set the Data sub-mode to DATA A.
Yes, you will need a computer application - try Fldigi or Ham Radio
Deluxe/DM780.
73,
Don W3FPR
On 9/30/2013 1:40 AM, Alan Grant wrote:
> Good morning Elecrafters
>
>
>
> I have not been able to make my K3 decode digital signals, and have seen
> many posts talking about Tigertronics Signalink USB, do I deed one of these
> or some other device
>
> To get into PSK31 etc, or do I need to fun some software to get things
> going. I see that many stations are using these modes and I would like to
> get involved as well
>
> Your assistance will be gratefully appreciated.
>
> Alan Grant
>
> VK4KO
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
