Chris,
No, it cannot be done that way - an RS-232 port cannot have multiple
drivers - that Y cable is to connect a port that only listens on the bus
- its drivers must be disabled - like the SteppIR controller.
If you want 2 applications to talk with the K3, you must use a virtual
port application such as LP-Pan - see www.telepostinc.com.
73,
Don W3FPR
On 10/3/2013 1:42 PM, Chris Pickett wrote:
> Hi Guys,
>
> Can someone please advise me on the following.
>
> When I ordered my K line, Elecraft supplied with a two way D Sub splitter
> cable.
>
> I have never used this but am running Ham Radio Deluxe, which I am familiar
> with, but would also like to run the Elecraft terminal..
>
> It would appear, of course, that the Radio cannot accept protocols from the
> PC via a single cable from more that one programme but I am wondering if I
> create a second Com Port and use an additional adapter that I might be able
> to get the K3 to 'talk' to the two programmes in unison.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
