K3 dx/rag. Mic setups

[mikerodgerske5gbc]

I don't ever remember different configurations being mentioned outside of k3 utility. Will I be able to set two different transmit equalizations setups via macro or some other way or only via the k3 utility?I for general use and one for  more punch ( narrower-more highs)

Thanks

I saw it on the radio!

Happy QSO'ing.      Mike R


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Iain MacDonnell - N6ML-2]

On Sun, Dec 19, 2010 at 4:29 PM, Mike Rodgers
<[hidden email]> wrote:
> I don't ever remember different configurations being mentioned outside of k3 utility. Will I be able to set two different transmit equalizations setups via macro or some other way or only via the k3 utility?I for general use and one for  more punch ( narrower-more highs)

Sure.... just define a couple of macros containing commands of the
form 'TE-16-16-08+00+00+00+00+00;', and assign them to programmable
function buttons. The "TE' command was added fairly recently, IIRC, so
you make sure your firmware is up-to-date. See the K3 Programmer's
Reference for more on macros and the 'TE' command.

73,

    ~Iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html