I mean the memorized tune point so the tuner wouldn't have to tune, just
recall previous setting from memory.
Larry/K2GN -
http://k2gn.com-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of vk4tux
Sent: Tuesday, May 22, 2012 7:57 PM
To:
[hidden email]
Subject: Re: [Elecraft] K3, etc. Question.
The K3_EZ swr plotter points will be of the KAT-500 input over the tested
frequency range.
I am not sure why that would be useful, unless a high swr is observed on the
k3.
What swr tune points do you mean? It is an autotuner in anycase yes?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-etc-Question-tp7556343p7556347.htmlSent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html