If you used s stereo plug, how is it wired? Should be tip and shield for ONE speaker.
Also is SPKR + PH set to YES? If this is NO then you won't have any speaker output. If the internal spkr works this isn't a problem.
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
[hidden email] wrote:
>I recently purchased 2 replacement K3 speakers to make tuned port enclosures for CW audio.
>Plugging one of the speakers to the rear panel jack (via 3.5mm stereo plug) to test resulted in no output.
>Had the config SPKRS = 1 Rear jack worked fine last time I tried an external speaker. Full audio
>output is fine on the internal speaker. Anyone reading had this issue? Any ideas?
>
>73,
>Mike AC5P
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
