K3 feature request, separate monitor tx-audio levels for speakers and line-out

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 feature request, separate monitor tx-audio levels for speakers and line-out

pa4la
Recording of TX audio is possible since:

MCU 2.72 / DSP 1.98, 12-9-2008
Misc. Changes:
** LINE OUT INCLUDES TX AUDIO: LINE OUT (*nor* menu setting) now includes transmit sidetone and speech/data monitor audio.

The monitor audio level is  the same for the speakers (headphone) as for the line-out.
It would be nice if monitor tx-audio levels could be set separate of each other for recording and streaming purposes .
Fixed level TX monitor line out is ok too if that makes things easier.

Monitor addition for example:
MON-speaker-level (front, MON as we know now)
MON-line-level (somewhere in the menu, once set not often changed)

This way the Monitor TX audio level for recording or streaming is independent from the operator's preference to monitor the tx-audio.
Yes even I get tired of my own voice but still what a nice recording of the complete QSO.

I know this feature is on the "consider" list but it has been a while so therefore the request to reconsider the consider list a bit :)

Thanks in advance,

Hugo pa4la


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 feature request, separate monitor tx-audio levels for speakers and line-out

Jorge Diez - CX6VM-2
Hi Hugo,

It´s also good for SO2R were you turn off monitor

73,
Jorge
CX6VM/CW5W

-----Mensaje original-----
De: [hidden email]
[mailto:[hidden email]] En nombre de pa4la
Enviado el: Sábado, 12 de Mayo de 2012 11:44 a.m.
Para: [hidden email]
Asunto: [Elecraft] K3 feature request, separate monitor tx-audio levels for
speakers and line-out

Recording of TX audio is possible since:

MCU 2.72 / DSP 1.98, 12-9-2008
Misc. Changes:
** LINE OUT INCLUDES TX AUDIO: LINE OUT (*nor* menu setting) now includes
transmit sidetone and speech/data monitor audio.

The monitor audio level is  the same for the speakers (headphone) as for the
line-out.
It would be nice if monitor tx-audio levels could be set separate of each
other for recording and streaming purposes .
Fixed level TX monitor line out is ok too if that makes things easier.

Monitor addition for example:
MON-speaker-level (front, MON as we know now) MON-line-level (somewhere in
the menu, once set not often changed)

This way the Monitor TX audio level for recording or streaming is
independent from the operator's preference to monitor the tx-audio.
Yes even I get tired of my own voice but still what a nice recording of the
complete QSO.

I know this feature is on the "consider" list but it has been a while so
therefore the request to reconsider the consider list a bit :)

Thanks in advance,

Hugo pa4la


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html