K3 how to remember setings per band

[Gary Smith-2]

Somehow I've lost the proper settings for the K3 to remember what it
is set for per band. As it is now, say I am on 20M and running CW,
working split, 50W output, filter width 150 cycles & I switch to 30M,
all the settings from 20 will apply to all the other bands except the
split will not carry over. When I go back to the band I was working
split on, the split does not remain in memory and I have to set it up
again.

What do I need to do in the config setup to have it remember the
settings per band?

Thanks,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Gary,

I suggest a study of the menu items to assist you with the various ways
to configure the K3.
In the case of remembering split, look at CONFIG SPLT SV.

73,
Don W3FPR

On 11/9/2011 1:55 AM, Gary Smith wrote:

> Somehow I've lost the proper settings for the K3 to remember what it
> is set for per band. As it is now, say I am on 20M and running CW,
> working split, 50W output, filter width 150 cycles&  I switch to 30M,
> all the settings from 20 will apply to all the other bands except the
> split will not carry over. When I go back to the band I was working
> split on, the split does not remain in memory and I have to set it up
> again.
>
> What do I need to do in the config setup to have it remember the
> settings per band?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html