K3 in ARRL10

[Edward R Cole]

I have the 6m ARR P50VDG Gasfet preamp and KVX3.  I wondered if the
P50VDG may have gain at 28-MHz?  I entered 28.400 and alternated
between the P50VDG and the internal PRE.  There were no signals to
check this on but with white noise the P50VDG shows slightly less
s-meter reading than the PRE.  No way to determining whether that is
due to different gain or lower noise figure?  With both off s-meter
reads zero with PRE S-2.  Antenna is Hygain TH3mk4 triband yagi.


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-1.4kw, 432-100w*, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep [hidden email]
======================================
*temp not in service
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html