After upgrading my K3 with some of the new boards from the K3S,
I tested my K144XV module by hitting the local repeater (about
1.5 miles from my roof mounted antenna). It came back to me so I
assumed everything was OK.
Then my wife (KI6SLX) acted as net control using the K3.
Everyone thought she was very scratchy. I hooked up a power/SWR
meeter to the antenna feed and it showed almost no power output.
I opened up the radio, reseated the TMP connectors, and the
power came back to normal.
Moral: Watch those TMP connectors.
73 Bill AE6JV
On 7/24/16 at 9:34 AM,
[hidden email] (Ron D'Eau Claire) wrote:
>If it's dead in all modes, or especially if it is intermittent, check to be
>sure the antenna cable is properly inserted in the TMP connector at the
>K144XV module.
-----------------------------------------------------------------------
Bill Frantz |The nice thing about standards| Periwinkle
(408)356-8506 |is there are so many to choose| 16345
Englewood Ave
www.pwpconsult.com |from. - Andrew Tanenbaum | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]