I was using the K3 at low power on PSK, and suddenly had no transmit power. Zip. Receive worked fine. All modes/bands/attempted power levels gave no power out. The rig was not in test mode, Config showed Tx inh=off, and KXV3=nor. Unfortunately the K3 is remote--about 250 miles, so an in person look will take a drive. Power output is monitored by an Alpha 9500 at the remote site. The lack of power was confirmed by a second user with his K3/0 mini/Remote Rig set. I saw one posting where a diode on the Rf board had blown: this would be nice! Does anyone have any further ideas??
Thanks, Chuck, N8CL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
