Thanks Dick but a switch toggle won't work - the result is indeterminate
unless there's a way to reset to a known value first. Is there a key
sequence that will place the subreceiver antenna selection in a known state?
Barry N1EU
On Tue, Feb 2, 2016 at 1:34 AM, RIchard Williams <
[hidden email]>
wrote:
> Barry,
>
> Yes, there is a command that will do exact what you want. If you take a
> look at the Programmer's Reference (which you can download on the Elecraft
> site), you will find the command on page 23 in Table 7. The command is
> SWT25;
>
> Keep in mind this is a "toggle" command. The command will toggle the Sub
> RX Ant on and off (just like tapping the RS ANT button on the K3). You
> will probably want to use this command in combination with other commands
> to make up a macro for whatever you are trying to accomplish.
>
> Dick, K8ZTT
>
>
>
> ------------------------------
> *From:* Barry N1EU <
[hidden email]>
> *To:* elecraft <
[hidden email]>
> *Sent:* Monday, February 1, 2016 6:02 PM
> *Subject:* [Elecraft] K3 macro for Subrx antenna?
>
> Does anyone know a way to program a K3 macro to set the Subreceiver antenna
> selectively to Main or Aux?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
