K3 macro help

[Joe K2UF]

Thanks to all who helped me with my first try at K3 macros.  I looked thru
the k3 programmers ref. but could not see anything about the SBx command.
Is there another reference manual with more in depth info that I need?

Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike KS7D]

Joe,

The SB command is in the K3 Programmer's Reference. Look in the Command Set Overview, Table 1 on page 1 and in the Command Reference section on page 16. Its listed as SB *, not SBx. SB0; turns the sub receiver off and SB1; turn it on.

Mike, ks7d

On Jan 7, 2012, at 8:07 PM, Joe K2UF wrote:

> Thanks to all who helped me with my first try at K3 macros.  I looked thru
> the k3 programmers ref. but could not see anything about the SBx command.
> Is there another reference manual with more in depth info that I need?
>
> Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many electrons
> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe K2UF]

Thanks Mike,

Part of my problem was I have an old copy of the pgmrs ref rev A.  It only
has 11 pages.  Just downloaded the latest rev.  That should help.

73 Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.


-----Original Message-----
From: Michael Downs [mailto:[hidden email]]
Sent: Saturday, January 07, 2012 8:39 PM
To: Joe K2UF
Cc: [hidden email]
Subject: Re: [Elecraft] K3 macro help

Joe,

The SB command is in the K3 Programmer's Reference. Look in the Command Set
Overview, Table 1 on page 1 and in the Command Reference section on page 16.
Its listed as SB *, not SBx. SB0; turns the sub receiver off and SB1; turn
it on.

Mike, ks7d

On Jan 7, 2012, at 8:07 PM, Joe K2UF wrote:

> Thanks to all who helped me with my first try at K3 macros.  I looked thru
> the k3 programmers ref. but could not see anything about the SBx command.
> Is there another reference manual with more in depth info that I need?
>
> Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many
electrons

> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html