K3 macros and buttons

[Mike Reublin]

I've assigned macros to the M1 thru M4 and PF1 & PF2 buttons. M1, M3,
M4, PF1, PF2 run the macros with a push & hold and their other functions
with a tap. M2 works the opposite way, running the macro with a tap and
the other function with a push.

Wot's the difference?

73, Mike NF4L

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Programmable functions (including macros) can be assigned to tap M1-M4 or
hold M1-M4 or PF1 or PF2 (10 total).

See page 21 of the owner's manual.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike
Sent: Thursday, June 24, 2010 4:07 PM
To: [hidden email]
Subject: [Elecraft] K3 macros and buttons

I've assigned macros to the M1 thru M4 and PF1 & PF2 buttons. M1, M3,
M4, PF1, PF2 run the macros with a push & hold and their other functions
with a tap. M2 works the opposite way, running the macro with a tap and
the other function with a push.

Wot's the difference?

73, Mike NF4L

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Reublin]

Thank you sir.

Mike

Dick Dievendorff wrote:

> Programmable functions (including macros) can be assigned to tap M1-M4 or
> hold M1-M4 or PF1 or PF2 (10 total).
>
> See page 21 of the owner's manual.
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Mike
> Sent: Thursday, June 24, 2010 4:07 PM
> To: [hidden email]
> Subject: [Elecraft] K3 macros and buttons
>
> I've assigned macros to the M1 thru M4 and PF1 & PF2 buttons. M1, M3,
> M4, PF1, PF2 run the macros with a push & hold and their other functions
> with a tap. M2 works the opposite way, running the macro with a tap and
> the other function with a push.
>
> Wot's the difference?
>
> 73, Mike NF4L
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html