K3 - missing 40m ?

[KU2C-2]

Today 40 meters has disappeared from the band UP and Down sequence on my K3 (#7306), it works fine with direct frequency entry or from laptop software. In other words it skips 40m and goes from 30m to 60m and vice versa when stepping thru the bands.


Any ideas ?


Pete



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Iain MacDonnell - N6ML-2]

Go to "CONFIG:BND MAP". Use the Band up/down buttons to select 7.0.
Rotate VFO A until you see "In".

73,

    ~iain / N6ML


On Wed, Jul 24, 2013 at 5:10 PM,  <[hidden email]> wrote:

>
>
>
>
>
> Today 40 meters has disappeared from the band UP and Down sequence on my K3 (#7306), it works fine with direct frequency entry or from laptop software. In other words it skips 40m and goes from 30m to 60m and vice versa when stepping thru the bands.
>
>
> Any ideas ?
>
>
> Pete
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KU2C-2]

Thanks Ian, Greg, Sam and Bill


You guys are good and fast - that was the issue ! MNI TNX


Pete // KU2C




----- Original Message -----
From: "iain macdonnell - N6ML" <[hidden email]>
To: [hidden email]
Cc: "elecraft" <[hidden email]>
Sent: Wednesday, July 24, 2013 8:15:41 PM
Subject: Re: [Elecraft] K3 - missing 40m ?

Go to "CONFIG:BND MAP". Use the Band up/down buttons to select 7.0.
Rotate VFO A until you see "In".

73,

~iain / N6ML


On Wed, Jul 24, 2013 at 5:10 PM, <[hidden email]> wrote:

>
>
>
>
>
> Today 40 meters has disappeared from the band UP and Down sequence on my K3 (#7306), it works fine with direct frequency entry or from laptop software. In other words it skips 40m and goes from 30m to 60m and vice versa when stepping thru the bands.
>
>
> Any ideas ?
>
>
> Pete
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html