K3 no RF Output

[dd0vs]

Dear Readers,

i made a water damage of my K3. Meanwhile Receiver is working again, after some repairs.

But there is still no RF output.

Main symptom is, that in case of TX (key down in CW) i find at J7 (8.215 MHz TXIF1) a 8.230MHz signal, but no signal passing the filter, expected approxymatetly 8.215Mhz too.

Any suggestions?

Regards
Harald
DD0VS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

Is VOX On?

Sent from my iPhone
...nr4c. bill

> On Jul 21, 2019, at 2:32 PM, Harald Fritzsche <[hidden email]> wrote:
>
> Dear Readers,
>
> i made a water damage of my K3. Meanwhile Receiver is working again, after some repairs.
>
> But there is still no RF output.
>
> Main symptom is, that in case of TX (key down in CW) i find at J7 (8.215 MHz TXIF1) a 8.230MHz signal, but no signal passing the filter, expected approxymatetly 8.215Mhz too.
>
> Any suggestions?
>
> Regards
> Harald
> DD0VS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]