K3 on RTTY FSK

[Claude Du Berger]

Hello Group
I am a new owner of a K3.
I was testing RTTY FSK before WPX and found
that it will only transmit on 10, 20 and 80m.
On other bands only have the red led...
Is there anything I should program?

Thanks
Claude VE2FK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Claude,

The mode (as well as the separate Data Mode) are 'per band' settings.  
Have you assured yourself that the mode was set to DATA on each band and
the Data Mode (hold DATA MD button) was set to FSK D - I assume that is
what you are using from your statement - you must use the ACC connector
input pin for FSK, if you are using soundcard generated RTTY, then
select AFSK and check that the mark frequency in your software is the
same as the setting on the K3.

73,
Don W3FPR

Claude Du Berger wrote:

> Hello Group
> I am a new owner of a K3.
> I was testing RTTY FSK before WPX and found
> that it will only transmit on 10, 20 and 80m.
> On other bands only have the red led...
> Is there anything I should program?
>
> Thanks
> Claude VE2FK
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Claude Du Berger]

Thanks Don and all the group.
Yes I am using FSK with a MK-II.
I had not FSK-D setted on all band. Will remember.
All is working nicely now.

Thanks, 73

Claude VE2FK
[hidden email]
K3 #3889

  ----- Original Message -----
  From: Don Wilhelm
  To: Claude Du Berger
  Cc: [hidden email]
  Sent: Thursday, February 11, 2010 9:38 PM
  Subject: Re: [Elecraft] K3 on RTTY FSK


  Claude,

  The mode (as well as the separate Data Mode) are 'per band' settings.  
  Have you assured yourself that the mode was set to DATA on each band and
  the Data Mode (hold DATA MD button) was set to FSK D - I assume that is
  what you are using from your statement - you must use the ACC connector
  input pin for FSK, if you are using soundcard generated RTTY, then
  select AFSK and check that the mark frequency in your software is the
  same as the setting on the K3.

  73,
  Don W3FPR

  Claude Du Berger wrote:
  > Hello Group
  > I am a new owner of a K3.
  > I was testing RTTY FSK before WPX and found
  > that it will only transmit on 10, 20 and 80m.
  > On other bands only have the red led...
  > Is there anything I should program?
  >
  > Thanks
  > Claude VE2FK
  >  
  >
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html