K3 on VLF

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 on VLF

David Andrews-3
Dave

 

I use a battery-powered Heathkit unit I bought off Ebay. Tunes 3.5-4.0Mhz
(0-500Khz). Datong made a similar one though I've not tried it.

 

Dave, G4CWB

 

 

 

Hi Dave,

 

You need a BC-453.

 

www.carc.org.uk/pdf/FavRx002.pdf

 

Wes

 

--- On Thu, 12/17/09, W5UN <[hidden email]> wrote:

 

 

> I am a K3 owner and user. I have the

> KRX3 module installed. What do I

> need in order to hear? below 500 kHz? Or is this even

> possible for

> the K3? Currently, there is a great signal drop off when I

> tune below 1 mHz.

>

> Dave, W5UN

>

 

 

David Andrews

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 on VLF

ww2r2
Dave

I am currently using my k3 succesfully on 500khz. Since arriving here last
saturday I have heard 3 signals while listening on a casual basis out to
650km

I using the amrad active antenna in the roof space, but am building a tuned
loop for 136/500khz

Dave

G4FRE (WW2R)


Message: 40
Date: Fri, 18 Dec 2009 01:12:56 +0000
From: W5UN <[hidden email]>
Subject: [Elecraft] K3 on VLF
To: [hidden email]
Message-ID: <[hidden email]>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I am a K3 owner and user. I have the KRX3 module installed. What do I
need in order to hear  below 500 kHz? Or is this even possible for
the K3? Currently, there is a great signal drop off when I tune below 1 mHz.

Dave, W5U

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 on VLF

drewko
I've heard a number of beacons on 600m. YWA, in Petawawa Ontario is
usually pretty strong here, 500 miles away. Plus lots of NAVTEX
stations on 518 KHz-- typically clean copy of New Orleans, 1200 miles
away.

I'm using my main transmit antenna, a 100 ft wire. The ATU is in LCSet
mode, the elements tuned to CA=0.0 (min), L=17.35 (max).

73,
Drew
AF2Z


On Fri, 18 Dec 2009 10:56:22 +0000, Dave wrote:

>Dave
>
>I am currently using my k3 succesfully on 500khz. Since arriving here last
>saturday I have heard 3 signals while listening on a casual basis out to
>650km
>
>I using the amrad active antenna in the roof space, but am building a tuned
>loop for 136/500khz
>
>Dave
>
>G4FRE (WW2R)
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html