K3 options compatible with K4D

[Charlie T, K3ICH]

Sorry if this has been already answered, but are there any K3/K3S options that are compatible with the K4?

For example, should I keep the transmit monitor board and sensor?

73, Charlie k3ICH



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

I doubt it. Where the TX MON board go?  There’s no O3 and no SVGA module.

I too wonder about the sensor.

Sent from my iPhone
...nr4c. bill

> On Aug 21, 2019, at 7:09 PM, Charlie T <[hidden email]> wrote:
>
>
> Sorry if this has been already answered, but are there any K3/K3S options that are compatible with the K4?
>
> For example, should I keep the transmit monitor board and sensor?
>
> 73, Charlie k3ICH
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

The K4 will work with all K3 accessories:

   - MH4 microphone
   - SP3 (but we'll also be offering an SP4)
   - KPA500
   - KAT500
   - KPA1500
   - Kpod (connects to a USB port on the K4)

The K4HD uses the same style of crystal filters used in the K3, so it may be possible to reuse some of them.

Transmit waveform monitoring is built-in for the K4 itself, and for any external amplifier that has a TX monitor output (like the KPA1500).

Amps that don't have a TX monitor output will require an external signal tap. We may offer one, but I can't put a date on that yet.

73,
Wayne
N6KR

> On Aug 22, 2019, at 4:03 AM, Nr4c <[hidden email]> wrote:
>
> I doubt it. Where the TX MON board go?  There’s no O3 and no SVGA module.
>
> I too wonder about the sensor.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Aug 21, 2019, at 7:09 PM, Charlie T <[hidden email]> wrote:
>>
>>
>> Sorry if this has been already answered, but are there any K3/K3S options that are compatible with the K4?
>>
>> For example, should I keep the transmit monitor board and sensor?
>>
>> 73, Charlie k3ICH
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]