[K3] pf key to change RF

[Dave, G4AON]

Not at the moment, but it may be on Wayne's "to do" list, it has been
mentioned previously on the list. It would be very handy for linear and
external ATU tuning. Same idea as Kenwood offer on their TS-480 with the
programmable key that will output a fixed level of RF from 5 - 100 Watts
in 1 Watt steps from any mode and from any power level at a single key
press.

Dave
K3/100 #80
=============
Sorry, being thick here, but is there a way to program a PF1 (or M1 etc) key
to change my RF to 5w, without affecting any other setting on the K3?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

Yes, Wayne has said that is coming sometime - while I'm waiting, I wondered
if I could just change RF level with a key.
No problem, time to play with AppleScript, MacLoggerDX and its direct
commands interface to send the appropriate cat command

On 6/1/08 14:53, "Dave G4AON" <[hidden email]> sent:
> Not at the moment, but it may be on Wayne's "to do" list, it has been
> mentioned previously on the list. It would be very handy for linear and
> external ATU tuning. Same idea as Kenwood offer on their TS-480 with the
> programmable key that will output a fixed level of RF from 5 - 100 Watts
> in 1 Watt steps from any mode and from any power level at a single key
> press.
--
The trees that are slow to grow bear the best fruit.
-Moliere, actor and playwright (1622-1673)


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com