Hi Philip,
You could set the power control (per band if you want) to 25 watts and the lock the power, mic gain, and compression. Go into the PWR SET menu and tap 1 to lock and unlock these.
73,
Fred, KE7X
For the newest KE7X book, "The Successful Ham Radio Operator's Handbook", focused for new hams and those returning to the hobby, see www.ke7x.com/successful<
http://www.ke7x.com/successful>
For all KE7X Elecraft books, see www.ke7x.com<
http://www.ke7x.com>
________________________________
From:
[hidden email] <
[hidden email]> on behalf of pca via Elecraft <
[hidden email]>
Sent: Friday, November 30, 2018 3:50 PM
To:
[hidden email]
Subject: [Elecraft] K3 power level question
Is there a way to limit a K3 to, for example, 25 watts via
it’s firmware. (Not an attenuator pad). I am familiar with
the Tune function which works FB. I am referring to setting
the max TX output to s designated value like 30 watts.
Pls respond directly to me (
[hidden email]) or via
the reflector if your reply is of general interest.
Thanks,
Philip KT3Y
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]