K3 power output instability

[w7xu]

Here's follow-up on the power instability problem I have been
experiencing with one of my K3s:

Although I already had the latest firmware loaded in the K3, I
reloaded the firmware.  I also ran the VCO MD calibration and
checked the 3 mounting screws on the bottom of the K3, as someone
had suggested.  I also ran the parameter initialization.

After all of the above, I again ran the TX gain calibration and
once again it failed (for both low/high power).  I have contacted
Elecraft support and am waiting to hear from them.

73,  Arliss
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html