Mine is not a PR6 but equivalent in NF and gain specs. I
re-installed it after replacing the GasFet (mgf-1402) which somehow
bit the dust awhile ago. It is installed on the K3 RX IN/OUT same as
one does the PR6.
I measured increase of my K3 6m MDS from -136 to -145 dBm using my
XG3 and 30-dB attenuator. Worked very nice for the VHF contest this
weekend. I now have one of my 3-element 6m yagis end-mounted on one
leg of my tower at 22-feet and fixed in the direction of the US west
coast (120-deg.) from Alaska. I worked six stations in five grids in
the Pac NW on Saturday night in a two-hour opening.
I will have some new photos tomorrow on:
http://www.kl7uw.com/HF.htm73, Ed - KL7UW
http://www.kl7uw.com[hidden email]
"Kits made by KL7UW"
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
