I'm assembling K3 #4564, my third K3 build, and I can't get the front panel to mate with the DSP board. The problem seems to be at J32 and the pins won't fully penetrate the female connector. The standoffs near there miss toiching the underside of the DSP by about 1/16" I've accidentally verified this by allowing the J32 pins to slip down beside the connector and everything fit fine. The connector at the other end of the board mates fine. It's as though something is wrong inside the female part of J32.
The J32 connector is still mating most of the way, so I'm thinking about clipping off about 1/16" of the pins. Any other suggestions?
73,
Randy, KS4L
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
