|
Just got my antenna up after 3 years of the air and tried the K3. It
just shuts down when keyed. Was back to the factory several months ago and not been turned on since. Have a manual somewhere but can't put my hands on it. Any help would be appreciated. 73, Jim, W5ODD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Jim -
You can download the manual. http://www.elecraft.com/K2_Manual_Download_Page.htm 73, Mike NF4L > On Oct 25, 2014, at 1:06 PM, Jim Bobo <[hidden email]> wrote: > > Just got my antenna up after 3 years of the air and tried the K3. It just shuts down when keyed. Was back to the factory several months ago and not been turned on since. Have a manual somewhere but can't put my hands on it. Any help would be appreciated. > > 73, Jim, W5ODD > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Bobo-2
Could the power supply be shutting down for some reason? Measure the PS
voltage when this happens. Also, try transmitting into a dummy load to eliminate possible RF-in-the-shack issues. On 25 Oct 2014 20:06, Jim Bobo wrote: > Just got my antenna up after 3 years of the air and tried the K3. It > just shuts down when keyed. Was back to the factory several months ago > and not been turned on since. Have a manual somewhere but can't put my > hands on it. Any help would be appreciated. > > 73, Jim, W5ODD -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Bobo-2
Jim,
Check the power supply to see if it is shutting off - if it not that, try the K3 into a dummy load. If the problem goes away with the dummy load, the most likely reason is RF in the shack. I did not think I had a problem with RF in the shack until I recently tried working on 10 meters. At power levels above 75 watts, the K3 would turn off all by itself - but no problem into a dummy load, so I have to get some ferrite on that antenna. If RF is causing it, take heed of the wealth of information for attacking it in K9YC's paper on dealing with RFI at http://audiosystemsgroup.com/RFI-Ham.pdf 73, Don W3FPR On 10/25/2014 1:06 PM, Jim Bobo wrote: > Just got my antenna up after 3 years of the air and tried the K3. It > just shuts down when keyed. Was back to the factory several months ago > and not been turned on since. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
| Free forum by Nabble | Edit this page |
