K3 problem

[N1IX-2]

My K3 developed a problem this weekend.
None of the front panel pushbuttons work correctly.

For example:
ATU tune   changes the  AGC value
ANT = NB2
RX  Ant = NB
PRE = ATU
SPOT = HI .Lo cut
CWT = CMP
etc.
Other pushbutton don't work at all.
A/B REV A->B, Band, Mode

The only button that works correctly is the "Power"

I've done a "parameter reset" I had to use the spot button instead of
holding in the Shift knob.
I also tried reloading firmware,
Any other suggestions ?

Dave N1IX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dave Hachadorian-2]

Try this:
http://marc.info/?l=elecraft&m=144267531705514&w=2


Dave Hachadorian, K6LL
Yuma, AZ


-----Original Message-----
From: [hidden email]
Sent: Monday, February 8, 2016 10:09 AM
To: 'Elecraft'
Subject: [Elecraft] K3 problem


My K3 developed a problem this weekend.
None of the front panel pushbuttons work correctly.

For example:
ATU tune   changes the  AGC value
ANT = NB2
RX  Ant = NB
PRE = ATU
SPOT = HI .Lo cut
CWT = CMP
etc.
Other pushbutton don't work at all.
A/B REV A->B, Band, Mode

The only button that works correctly is the "Power"

I've done a "parameter reset" I had to use the spot button
instead of
holding in the Shift knob.
I also tried reloading firmware,
Any other suggestions ?

Dave N1IX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[N1IX-2]

Problem is fixed thanks to Dave, K6LL and Elecraft support for the
suggestions. Thanks for the great support and a fantastic reflector!
If anyone need the fix it is at.

http://marc.info/?l=elecraft&m=144267531705514&w=2

Dave N1IX

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: Monday, February 08, 2016 12:09 PM
To: 'Elecraft' <[hidden email]>
Subject: [Elecraft] K3 problem


My K3 developed a problem this weekend.
None of the front panel pushbuttons work correctly.

For example:
ATU tune   changes the  AGC value
ANT = NB2
RX  Ant = NB
PRE = ATU
SPOT = HI .Lo cut
CWT = CMP
etc.
Other pushbutton don't work at all.
A/B REV A->B, Band, Mode

The only button that works correctly is the "Power"

I've done a "parameter reset" I had to use the spot button instead of
holding in the Shift knob.
I also tried reloading firmware,
Any other suggestions ?

Dave N1IX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]