K3 question

[Ai4PF]

I have a K3 100 watt transceiver. The amp is a SG500. I use the "power
set per band " from the config menu to store drive settings
independently for each band.

Is there any way to set up the K3 so that one can switch on the fly from
barefoot operation to the amp without going through the necessary manual
steps?

Bill Wade, Ai4PF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Reublin]

I put a macro in M4 that switches to 53 watts PC053; Another in M1 to go back to 100
watts. PC100;

73, Mike NF4L

On 12/10/2010 4:45 PM, bill wade, sr. wrote:

> I have a K3 100 watt transceiver. The amp is a SG500. I use the "power
> set per band " from the config menu to store drive settings
> independently for each band.
>
> Is there any way to set up the K3 so that one can switch on the fly from
> barefoot operation to the amp without going through the necessary manual
> steps?
>
> Bill Wade, Ai4PF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html