K3 read out for a macro

[DK5EW]

Hi all,
is the a possibility to read out the K3 settings and save it as a macro ?
best regards Erwin/DK5EW

--
best regards
Erwin/DK5EW




-----
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1410 / Virendatenbank: 1520/3910 - Ausgabedatum: 21.09.2011
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Erwin,

K3Utility has provisions for saving the K3 configuration to a file on
your computer, and then re-loading that configuration.  It is not a
macro, the file is unique to K3 Utility.

I do not understand why a macro is wanted/needed, but you may have
something specific in mind.
If that is the case, refer to the K3 Programmer's Reference.  Virtually
everything in the K3 can be accessed by software, and if you write the
software to create a macro and send it back to the K3, yes it could be
done, but I don't think that is done with any current software package.

73,
Don W3FPR

On 9/21/2011 2:11 PM, DK5EW wrote:
> Hi all,
> is the a possibility to read out the K3 settings and save it as a macro ?
> best regards Erwin/DK5EW
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Peter-64]

Perhaps is Erwin a contester in a M/M group
It will be nice to make all the prived bring in K3 to be configured in
the same way to make them equal

This isn''t possible because a copy is bound to the serial of the K3

Peter
PC2A
Don Wilhelm schreef:

> Erwin,
>
> K3Utility has provisions for saving the K3 configuration to a file on
> your computer, and then re-loading that configuration.  It is not a
> macro, the file is unique to K3 Utility.
>
> I do not understand why a macro is wanted/needed, but you may have
> something specific in mind.
> If that is the case, refer to the K3 Programmer's Reference.  Virtually
> everything in the K3 can be accessed by software, and if you write the
> software to create a macro and send it back to the K3, yes it could be
> done, but I don't think that is done with any current software package.
>
> 73,
> Don W3FPR
>
> On 9/21/2011 2:11 PM, DK5EW wrote:
>  
>> Hi all,
>> is the a possibility to read out the K3 settings and save it as a macro ?
>> best regards Erwin/DK5EW
>>
>>    
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html