K3: rear panel fitment/alignment

[K2QI]

Hello all,

 

My K3 has been built for some time, and working quite well.  However, I've
been a bit curious about the rear panel alignment especially as it relates
to the ground post and power pole connection.  Those two never seemed to
line up right with the cutouts in the rear panel, while all other things
did.  The powerpole connector in the back was quite off-centered.  As it is,
the rear panel cutout for the power connecter sits in the recess of the
connector, and if you look at the back, the powerpole connector is shifted
over to the left leaving a small gap.  It doesn't seem stressed, but I was
wondering if that's typical?  I've done just about everything to make sure
everything was lined up, including readjusting the 2D fasteners, but that
didn't help.

 

73,

James K3JPS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html