K3 resistance check prolblem

[RobertG]

I'm assembling a K3, and I'm doing the resistance checks on page 45
between U12 and U13 to ground [Rev L6 manual]. U13 measures around 450
ohms to ground [OK]. U12 initially measures 900 ohms, goes up to about
2.5K ohms in a second or two, and then drops to 0 ohms. I'm using a DVM
to make these measurements. Any comments about this finding will be
helpful. I'm stopped here until I can get this cleared up. Thanks much.

...robert
--
Robert G. Strickland, PhD, ABPH - KE2WY
[hidden email]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html