Elecraft

K3....s Raspberry Pi 4 B

Classic

List

Threaded

6 messages Options

Ken Chandler

K3....s Raspberry Pi 4 B

Hi All.
Anyone have a K3 usb and Raspberry Pi 4 working on WSJT-X! for FT4 mode.
I have a K3 converted to USB
Would be interested in setup etc!
Please share or email me direct if the bandwidth is toooo wide!

Oh, congrats Space-X !!

Regards
Ken.. G0ORH

Sent from my iPad

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

AL7CR

Re: K3....s Raspberry Pi 4 B

I have tried but rig TX control is seriously broken for the K3 in WSJT-X on the Pi. Online sources all point fingers at each other and I could find no solutions. Flrig control works perfectly but NOT with WSJT-X. You might be able to use VOX.

Be ready for a major hassle.

On Mon, Jan 20, 2020, at 3:48 AM, Ken Chandler wrote:

> Hi All.
> Anyone have a K3 usb and Raspberry Pi 4 working on WSJT-X! for FT4 mode.
> I have a K3 converted to USB
> Would be interested in setup etc!
> Please share or email me direct if the bandwidth is toooo wide!
>
> Oh, congrats Space-X !!
>
> Regards
> Ken.. G0ORH
>
> Sent from my iPad
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jim Brown-10

Re: K3....s Raspberry Pi 4 B

On 1/20/2020 8:55 AM, AL7CR wrote:
> You might be able to use VOX.

VOX is a perfectly good way to key the radio. I've used nothing but VOX
for SSB, RTTY, and WSJT modes for at least 15 years.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Wes Stewart-2

Re: K3....s Raspberry Pi 4 B

So have I, perhaps even longer. The only downside with Elecraft radios is that
VOX audio sampling follows the mic/line gain setting and is of course affected
by them. Without judicious setting of digital mode line level/sound card
level/WSJT "power level" settings, there is a nonsensical need to readjust VOX
gain when changing modes. A request to remember VOX gain between modes has
always fallen on deaf ears. With the K4 now the focus, this will never happen.

Wes N7WS

On 1/20/2020 11:45 AM, Jim Brown wrote:
>
> VOX is a perfectly good way to key the radio. I've used nothing but VOX for
> SSB, RTTY, and WSJT modes for at least 15 years.
>
> 73, Jim K9YC
> ______________________________________________________________

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Bob McGraw - K4TAX

Re: K3....s Raspberry Pi 4 B

I’ve always used CAT control for PTT with 100% success with all of my software applications. That way I can switch between SSB and Data and find it not necessary to make any radio adjustments.

Bob, K4TAX

Sent from my iPhone

> On Jan 20, 2020, at 2:41 PM, Wes <[hidden email]> wrote:
>
> So have I, perhaps even longer. The only downside with Elecraft radios is that VOX audio sampling follows the mic/line gain setting and is of course affected by them. Without judicious setting of digital mode line level/sound card level/WSJT "power level" settings, there is a nonsensical need to readjust VOX gain when changing modes. A request to remember VOX gain between modes has always fallen on deaf ears. With the K4 now the focus, this will never happen.
>
> Wes N7WS
>
>
>> On 1/20/2020 11:45 AM, Jim Brown wrote:
>>
>> VOX is a perfectly good way to key the radio. I've used nothing but VOX for SSB, RTTY, and WSJT modes for at least 15 years.
>>
>> 73, Jim K9YC
>> ______________________________________________________________
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Leroy Buller

Re: K3....s Raspberry Pi 4 B

In reply to this post by Jim Brown-10

Me too.

Lee K0WA

On Mon, Jan 20, 2020, 12:45 PM Jim Brown <[hidden email]> wrote:

> On 1/20/2020 8:55 AM, AL7CR wrote:
> > You might be able to use VOX.
>
> VOX is a perfectly good way to key the radio. I've used nothing but VOX
> for SSB, RTTY, and WSJT modes for at least 15 years.
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>