K3 +sign in display

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 +sign in display

Jim Sheldon
Hadn't paid much attention to the really little things in the display, but a while ago while operating CW that there was a + sign under and a little to the right of the B vfo indicator.  Wondering what this was, I started digging in the book and didn't find anything except that it would indicate repeater offset in FM mode with the 2 meter transverter installed or that ESSB was on when in SSB mode.  Nothing I could find mentioned CW.  

Since I had only recently started testing the new features Wayne had added in test version 4.30 (it still reports 4.29) of the firmware (not available yet on the website) I had QRQ turned on.  Not being very observant I missed it, but the + in CW mode indicates that QRQ mode is ON in the configuration menu.  

It may be in the manual, but I couldn't find it so thought I'd post my observations here in case anyone else had wondered what it was for when in CW mode.

Jim - W0EB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 +sign in display

Ed Muns, W0YK
QRG mode.  May not be in the manual or manual errata yet, but it is in the
release notes, though I don't recall which release.

Ed - W0YK

Jim, W0EB, asked:

> Hadn't paid much attention to the really little things in the
> display, but a while ago while operating CW that there was a
> + sign under and a little to the right of the B vfo
> indicator.  Wondering what this was, I started digging in the
> book and didn't find anything except that it would indicate
> repeater offset in FM mode with the 2 meter transverter
> installed or that ESSB was on when in SSB mode.  Nothing I
> could find mentioned CW.  
>
> Since I had only recently started testing the new features
> Wayne had added in test version 4.30 (it still reports 4.29)
> of the firmware (not available yet on the website) I had QRQ
> turned on.  Not being very observant I missed it, but the +
> in CW mode indicates that QRQ mode is ON in the configuration menu.  
>
> It may be in the manual, but I couldn't find it so thought
> I'd post my observations here in case anyone else had
> wondered what it was for when in CW mode.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 +sign in display

wayne burdick
Administrator
Ed Muns wrote:

> QRG mode.

QRQ.

>  May not be in the manual or manual errata yet...

It has been in the manual for quite awhile, actually. Or see firmware  
release notes for revision 4.03.

73,
Wayne
N6KR

> but it is in the
> release notes, though I don't recall which release.
>
> Ed - W0YK
>
> Jim, W0EB, asked:
>> Hadn't paid much attention to the really little things in the
>> display, but a while ago while operating CW that there was a
>> + sign under and a little to the right of the B vfo
>> indicator.  Wondering what this was, I started digging in the
>> book and didn't find anything except that it would indicate
>> repeater offset in FM mode with the 2 meter transverter
>> installed or that ESSB was on when in SSB mode.  Nothing I
>> could find mentioned CW.
>>
>> Since I had only recently started testing the new features
>> Wayne had added in test version 4.30 (it still reports 4.29)
>> of the firmware (not available yet on the website) I had QRQ
>> turned on.  Not being very observant I missed it, but the +
>> in CW mode indicates that QRQ mode is ON in the configuration menu.
>>
>> It may be in the manual, but I couldn't find it so thought
>> I'd post my observations here in case anyone else had
>> wondered what it was for when in CW mode.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html