I've been using this version with no problem until today. Had K-3 on 30 m,
running 100 w. Second receiver on 40. Decided to switch bands, using the A/B
button. 40m frequency was then on the A RX and i started to transmit. The
output power was 100 w, not the usual setting I use on 40 which is much lower to
drive the amp.
I do have the PWR SET to Per-Band in the Config file.
Could this be addressed in a future firmware update?
Thanks.
73,
Art KZ5D
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(
http://pr.atwola.com/promoclk/100126575x1220572833x1201387477/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID%3D62%26bcd%3DAprilfooterNO62)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html