You can switch an external speaker (or two) between the radio and the RRC.
You might need a little amplification, depending on the efficiency of the
chosen speaker(s). Powered computer speakers should do nicely.
/Rick N6XI
Rick Tavan
Truckee, CA
On Mon, Nov 20, 2017 at 12:31 PM, Fred Jensen <
[hidden email]> wrote:
> Jorge,
>
> You said "K3". RemoteRig with a K3 is a bit different than with a K3s or
> K3/0. With the K3, the receive audio is on the SP jack on the RRC 1258.
> It never gets into the control K3 radio.
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 11/20/2017 10:47 AM, Jorge Diez - CX6VM wrote:
>
>> Hello
>>
>> I use K3 speaker, I programmed RIT button to switch SPKR+PH to YES and NO
>>
>> Now I connected Remoterig, and on control radio, I am not able to listen
>> to
>> K3 speaker
>>
>> How can I do to listen to K3 speaker, so, to hear K3 speaker when SPKR+PH
>> = YES ?
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
