Elecraft › [K3]

K3/ steppIR

Classic

List

Threaded

6 messages Options

Martin Staffa

K3/ steppIR

I am sure some one has run into this problem before, How would I go about
connecting my the computer to run along with the controller for my steppIR
to the K3

Martin N1KGP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Mike Reublin

Re: K3/ steppIR

You need a Y cable. SteppIR sells them, or you can build one. The schematic is on the
SteppIR site.
73, Mike NF4L

On 7/24/2011 3:09 PM, Martin Staffa wrote:

> I am sure some one has run into this problem before, How would I go about
> connecting my the computer to run along with the controller for my steppIR
> to the K3
>
> Martin N1KGP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

w0mu

Re: K3/ steppIR

Does SteppIR now support the K3 or does it work ok using the Kenwood
protocols?

On 7/24/2011 2:39 PM, Mike wrote:

> You need a Y cable. SteppIR sells them, or you can build one. The schematic is on the
> SteppIR site.
> 73, Mike NF4L
>
> On 7/24/2011 3:09 PM, Martin Staffa wrote:
>> I am sure some one has run into this problem before, How would I go about
>> connecting my the computer to run along with the controller for my steppIR
>> to the K3
>>
>> Martin N1KGP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

N2TK

Re: K3/ steppIR

Mike,
On my SDA 100 I selected KENW for my K3. There was no option for Elecraft.
73,
N2TK, Tony

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike Fatchett W0MU
Sent: Sunday, July 24, 2011 5:13 PM
To: [hidden email]
Subject: Re: [Elecraft] K3/ steppIR

Does SteppIR now support the K3 or does it work ok using the Kenwood
protocols?

On 7/24/2011 2:39 PM, Mike wrote:
> You need a Y cable. SteppIR sells them, or you can build one. The
schematic is on the
> SteppIR site.
> 73, Mike NF4L
>
> On 7/24/2011 3:09 PM, Martin Staffa wrote:
>> I am sure some one has run into this problem before, How would I go about
>> connecting my the computer to run along with the controller for my
steppIR

>> to the K3
>>
>> Martin N1KGP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Mike Reublin

Re: K3/ steppIR

Same for the older controller.

73, Mike NF4L

On 7/24/2011 6:49 PM, N2TK, Tony wrote:

> Mike,
> On my SDA 100 I selected KENW for my K3. There was no option for Elecraft.
> 73,
> N2TK, Tony
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Mike Fatchett W0MU
> Sent: Sunday, July 24, 2011 5:13 PM
> To: [hidden email]
> Subject: Re: [Elecraft] K3/ steppIR
>
> Does SteppIR now support the K3 or does it work ok using the Kenwood
> protocols?
>
> On 7/24/2011 2:39 PM, Mike wrote:
>> You need a Y cable. SteppIR sells them, or you can build one. The
> schematic is on the
>> SteppIR site.
>> 73, Mike NF4L
>>
>> On 7/24/2011 3:09 PM, Martin Staffa wrote:
>>> I am sure some one has run into this problem before, How would I go about
>>> connecting my the computer to run along with the controller for my
> steppIR
>>> to the K3
>>>
>>> Martin N1KGP
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

Larry stowell

Re: K3/ steppIR

In reply to this post by w0mu

Mike
Mine worked fine with the y-cable and the Kenwood protocol(that's before ZEUS got to it.

73 Larry K1ZW

-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of Mike
Fatchett W0MU
Sent: Sunday, July 24, 2011 5:13 PM
To: [hidden email]
Subject: Re: [Elecraft] K3/ steppIR

Does SteppIR now support the K3 or does it work ok using the Kenwood
protocols?

On 7/24/2011 2:39 PM, Mike wrote:

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1390 / Virus Database: 1518/3786 - Release Date: 07/24/11

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html